 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2N3906 Preferred Device General Purpose Transistors PNP Silicon http://onsemi.com Features * Pb-Free Packages are Available* 2 BASE COLLECTOR 3 MAXIMUM RATINGS Rating Collector - Emitter Voltage Collector - Base Voltage Emitter - Base Voltage Collector Current - Continuous Total Device Dissipation @ TA = 25C Derate above 25C Total Power Dissipation @ TA = 60C Total Device Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VCEO VCBO VEBO IC PD PD PD TJ, Tstg Value 40 40 5.0 200 625 5.0 250 1.5 12 -55 to +150 Unit Vdc Vdc Vdc mAdc mW mW/C mW W mW/C C 3 STRAIGHT LEAD BULK PACK 12 TO-92 CASE 29 STYLE 1 1 1 EMITTER 3 BENT LEAD TAPE & REEL AMMO PACK 2 THERMAL CHARACTERISTICS (Note 1) Characteristic Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Case Symbol RqJA RqJC Max 200 83.3 Unit C/W C/W 2N 3906 ALYWG G MARKING DIAGRAM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Indicates Data in addition to JEDEC Requirements. A = Assembly Location L = Wafer Lot Y = Year W = Work Week G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2007 1 March, 2007 - Rev. 3 Publication Order Number: 2N3906/D 2N3906 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage (Note 2) Collector -Base Breakdown Voltage Emitter -Base Breakdown Voltage Base Cutoff Current Collector Cutoff Current ON CHARACTERISTICS (Note 2) DC Current Gain (IC = 0.1 mAdc, VCE = 1.0 Vdc) (IC = 1.0 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 50 mAdc, VCE = 1.0 Vdc) (IC = 100 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc) hFE 60 80 100 60 30 - - 0.65 - - - 300 - - 0.25 0.4 0.85 0.95 - (IC = 1.0 mAdc, IB = 0) (IC = 10 mAdc, IE = 0) (IE = 10 mAdc, IC = 0) (VCE = 30 Vdc, VEB = 3.0 Vdc) (VCE = 30 Vdc, VEB = 3.0 Vdc) V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX 40 40 5.0 - - - - - 50 50 Vdc Vdc Vdc nAdc nAdc Symbol Min Max Unit Collector -Emitter Saturation Voltage Base -Emitter Saturation Voltage SMALL- SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product Output Capacitance Input Capacitance Input Impedance Voltage Feedback Ratio Small-Signal Current Gain Output Admittance Noise Figure VCE(sat) VBE(sat) Vdc Vdc (IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz) (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) fT Cobo Cibo hie hre hfe hoe NF 250 - - 2.0 0.1 100 3.0 - - 4.5 10 12 10 400 60 4.0 MHz pF pF kW X 10- 4 - mmhos dB (IC = 100 mAdc, VCE = 5.0 Vdc, RS = 1.0 kW, f = 1.0 kHz) SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time (VCC = 3.0 Vdc, VBE = 0.5 Vdc, IC = 10 mAdc, IB1 = 1.0 mAdc) (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = IB2 = 1.0 mAdc) (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = IB2 = 1.0 mAdc) td tr ts tf - - - - 35 35 225 75 ns ns ns ns 2. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 2%. http://onsemi.com 2 2N3906 ORDERING INFORMATION Device 2N3906 2N3906G 2N3906RL1 2N3906RL1G 2N3906RLRA 2N3906RLRAG 2N3906RLRM 2N3906RLRMG 2N3906RLRP 2N3906RLRPG Package TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) Shipping 5000 Units / Bulk 5000 Units / Bulk 5000 Units / Bulk 5000 Units / Bulk 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Ammo Pack 2000 / Ammo Pack 2000 / Tape & Reel 2000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 3V 275 < 1 ns +0.5 V 10 k CS < 4 pF* 10.6 V 300 ns DUTY CYCLE = 2% * Total shunt capacitance of test jig and connectors Figure 1. Delay and Rise Time Equivalent Test Circuit 3V +9.1 V < 1 ns 275 10 k 0 1N916 10 < t1 < 500 ms DUTY CYCLE = 2% t1 10.9 V CS < 4 pF* * Total shunt capacitance of test jig and connectors Figure 2. Storage and Fall Time Equivalent Test Circuit http://onsemi.com 3 2N3906 TYPICAL TRANSIENT CHARACTERISTICS TJ = 25C TJ = 125C 10 7.0 CAPACITANCE (pF) Q, CHARGE (pC) 5.0 Cobo Cibo 3.0 2.0 5000 3000 2000 1000 700 500 300 200 100 70 50 VCC = 40 V IC/IB = 10 QT QA 1.0 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 REVERSE BIAS (VOLTS) 20 30 40 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 200 Figure 3. Capacitance Figure 4. Charge Data 500 300 200 100 70 50 30 20 10 7 5 IC/IB = 10 500 300 200 IC/IB = 20 t f , FALL TIME (ns) 100 70 50 30 20 10 7 5 IC/IB = 10 VCC = 40 V IB1 = IB2 TIME (ns) tr @ VCC = 3.0 V 15 V 40 V 2.0 V td @ VOB = 0 V 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 5. Turn -On Time Figure 6. Fall Time http://onsemi.com 4 2N3906 TYPICAL AUDIO SMALL-SIGNAL CHARACTERISTICS NOISE FIGURE VARIATIONS (VCE = - 5.0 Vdc, TA = 25C, Bandwidth = 1.0 Hz) 5.0 SOURCE RESISTANCE = 200 W IC = 1.0 mA NF, NOISE FIGURE (dB) SOURCE RESISTANCE = 200 W IC = 0.5 mA SOURCE RESISTANCE = 2.0 k IC = 50 mA 12 f = 1.0 kHz 10 IC = 0.5 mA 8 6 4 2 0 IC = 50 mA IC = 100 mA IC = 1.0 mA NF, NOISE FIGURE (dB) 4.0 3.0 2.0 SOURCE RESISTANCE = 2.0 k IC = 100 mA 0.2 0.4 1.0 2.0 4.0 10 f, FREQUENCY (kHz) 20 40 100 1.0 0 0.1 0.1 0.2 0.4 1.0 2.0 4.0 10 20 Rg, SOURCE RESISTANCE (k OHMS) 40 100 Figure 7. Figure 8. h PARAMETERS (VCE = - 10 Vdc, f = 1.0 kHz, TA = 25C) 300 hoe , OUTPUT ADMITTANCE (m mhos) 5.0 7.0 10 100 70 50 30 20 h fe , DC CURRENT GAIN 200 100 70 50 10 7 30 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 7.0 10 Figure 9. Current Gain h re , VOLTAGE FEEDBACK RATIO (X 10-4 ) 20 h ie , INPUT IMPEDANCE (k OHMS) 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 10 7.0 5.0 3.0 2.0 Figure 10. Output Admittance 1.0 0.7 0.5 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 7.0 10 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 7.0 10 Figure 11. Input Impedance Figure 12. Voltage Feedback Ratio http://onsemi.com 5 2N3906 TYPICAL STATIC CHARACTERISTICS h FE , DC CURRENT GAIN (NORMALIZED) 2.0 TJ = +125C 1.0 0.7 0.5 0.3 0.2 +25C -55 C VCE = 1.0 V 0.1 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (mA) 20 30 50 70 100 200 Figure 13. DC Current Gain VCE , COLLECTOR EMITTER VOLTAGE (VOLTS) 1.0 TJ = 25C 0.8 IC = 1.0 mA 10 mA 30 mA 100 mA 0.6 0.4 0.2 0 0.01 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 IB, BASE CURRENT (mA) 0.7 1.0 2.0 3.0 5.0 7.0 10 Figure 14. Collector Saturation Region TJ = 25C 0.8 V, VOLTAGE (VOLTS) VBE(sat) @ IC/IB = 10 VBE @ VCE = 1.0 V q V , TEMPERATURE COEFFICIENTS (mV/ C) 1.0 1.0 0.5 0 -0.5 +25C TO +125C -1.0 -55 C TO +25C -1.5 -2.0 qVB FOR VBE(sat) qVC FOR VCE(sat) +25C TO +125C -55 C TO +25C 0.6 0.4 VCE(sat) @ IC/IB = 10 0.2 0 1.0 2.0 50 5.0 10 20 IC, COLLECTOR CURRENT (mA) 100 200 0 20 40 60 80 100 120 140 IC, COLLECTOR CURRENT (mA) 160 180 200 Figure 15. "ON" Voltages Figure 16. Temperature Coefficients http://onsemi.com 6 2N3906 PACKAGE DIMENSIONS TO-92 (TO-226) CASE 29-11 ISSUE AM A R P L SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --- 0.250 --- 0.080 0.105 --- 0.100 0.115 --- 0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --- 6.35 --- 2.04 2.66 --- 2.54 2.93 --- 3.43 --- B STRAIGHT LEAD BULK PACK K XX G H V 1 D J C SECTION X-X N N R A B BENT LEAD TAPE & REEL AMMO PACK P T SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 --- 2.04 2.66 1.50 4.00 2.93 --- 3.43 --- STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR K XX G D J V C SECTION X-X N 1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 7 2N3906/D |
Price & Availability of 2N390607
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |